日本漫画天翼鸟之漫画大全

  PRODUCTS LIST
  Electric glow plugs
  Planetary shaft
  Rotor shaft
  CONTACT US
  Add: Kandun Industrial Development Zone, Cixi, Zhejiang
Mobile: 86-13968280020
Tel: 86-574-63288375
Fax: 86-574-63272485
Contact: Jone
Email: jonebearings@cnool.net
Web: www.jerseyschinasale.com
  NEWS HOME > NEWS


Replace the spark plug experience
 
In most cases, you can buy the original car brand and the same type of spark plug products, so you can do without the need to adjust the spark plug gap and direct use.
Different types of engine spark plug electrode gap size is not the same. In general, the natural intake engine uses a spark plug with an electrode clearance of 1.1 mm, while the turbocharged engine uses a spark plug with an electrode clearance of 0.8 mm.
Buy the new spark plug thread length and calorific value are consistent with the old spark plug, but the spark plug electrode gap gap is relatively large. The electrode gap of the old spark plug is 1.0mm and the electrode gap of the new spark plug is only 0.75mm. The gap of 0.25mm is enough to make the engine power and economic characteristics different. The electrode gap is too large, will make the arc length, but the energy is weakened, which will cause the cylinder fire; the opposite electrode gap is too small, will increase the arc energy, but because the flame nuclear off the electrode close, Combustion is not complete, increase fuel consumption.



Previous: Spark plug most long-term use Next: How to replace the spark plug wire


[Close]


Copyright(c) Cixi Fu Shi Machinery Co.,Ltd. All Rights Reserved    Tel: 86-574-63288375    Fax: 86-574-63272485    Email: jonebearings@cnool.net